A ready-to-use water-based acrylic putty, suitable for stuccoing (skim coat puttying) in interior and exterior areas. It is very convenient in application and rubbing. It provides a flat and smooth final surface, ready for priming and painting.

1. Ideal stuccoing surfaces of plaster, concrete, masonry, wood, gypsum board, and cement board.
2. For curing plastic-based paints.
3. Ideal filler for leveling up of walls before tile laying and For fixing plasterboard panels.

1 liquid Based Component

1. The surface should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, etc.
2. Mix with a mechanical plaster mixer or low-speed electric drill fitted with a suitable paddle for 3-4 minutes, until a uniform, lump-free consistency is achieved.
3. Spread the putty directly using a putty knife or roll and make sure the surface is even.
4. Leave to dry for 3 hours to fully set.
5. Apply the second coat in the opposite direction (if needed) to ensure the surface is even and flat.

Mixed wet density: 2.0g / cm3
Coverage: kg / m2: 2
Composition: Special Polymers
Flexural Strength: > 9 MPa over 28 days
Potlifehours: 3-4

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

N/A