An improved tile adhesive that works in various environmental conditions and bonds all types of ceramic, marble, and natural stone tiles.

1- Suitable for dry & wet conditions
2- Suitable for ceramic tiles and marble
3- In residential and commercial buildings

1 Powder-based component

1- Surface preparation: Ensure that surface is clean with zero residue such as dust, grease, and moisture etc.
2- Add 4.0 ltr of water to 20 Kg tile adhesive. Slowly add water while mixing continuously with low speed mixer / drill (400-600 rpm) for 3 min until a uniform consistency is obtained.
3- Let the mixture stand for 10 minutes to allow the resins to dissolve completely.
4- Apply the Adhesive on the substrate to a uniform thickness of 2 to 3 mm evenly using a notched spatula
5- Fix the tile over the adhesive and press firmly to ensure maximum bonding between tile and adhesive.

Application temperature: from 5 to 35 ° C
Yield: 20 Kg mixed with 4 to 4.5 Ltr of water gives 13lts of mixed adhesive
Initial setting: 25 min
Comprehensive Strength: < 0.6 N mm2

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

British Standards Institute: BS 5980 Type Class A British Standards Institute: BS 5385 Part 1 European Standards: EN 12004