Polyweds water-based concrete curing compound is based on a low viscosity wax emulsion. It is supplied as a white emulsion which forms a clear film on drying. This product is formulated to be suitable for all general concreting applications and of particular benefit for large area concrete surfaces and may be used on the interior, exterior, vertical, and horizontal concrete surfaces. Once applied, it forms a water-based liquid membrane (therefore nonflammable) that retains an optimum amount of water present in freshly placed concrete to allow complete hydration of the cement.

1. Large areas of concrete surfaces, such as airport runways, roads, and bridgeworks.
2. Applied via spray by creating a membrane to retain moisture in concrete which is ideal for effective curing.
3. Areas that are exposed to hard-wearing, dust, surface cracking and shrinkage.

1 Liquid Based Component

1. This product should be applied 24 hours after the application of concrete and when the surface water has completely disappeared.
2. Use a sprayer or roller to apply a uniform film. Avoid puddling in low areas. If puddles occur, brush or roll them out. For optimum performance, apply first coat.
3. Wait for a period of 2 hours
4. After the first coat has thoroughly dried, apply a second coat. NOTE: The second coat should be applied at a right angle
5. Leave it for three days to fully set.

N/A

This original sealed container has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25°C

N/A