SBR Bond Pure is a highly concentrated latex based solution that acts as a water resistant bonding agent and admixture for use in areas subject to humidity, dampness and continuous water contact. It improves water resistance of cement mixtures by forming a reinforcing polymer that increases long-term durability and flexibility of the mix on renderings and floor screeds.

1. Bonding of new to old concrete when used as a slurry coat. Moreover, this product is used to produce polymer modified screeds and floor toppings and waterproof renders.
2. To produce a mechanical key prior to rendering of various plaster mixes on concrete, brick and block surfaces.
3. To produce a repair mortar for patching of honeycombed concrete, internally and externally.

1 Liquid Based Component

1. Where Poly Bond SBR should be used, the substrate should be sound, clean and free contamination. Dilute the bond by Adding water (1-part Poly Bond SBR to 4 parts water)
2. Using an electronic mixer, mix the diluted bond for 3 minutes. more water could be added to achieve the required workability.
3. Add the diluted bond to the cementitious mixture and mix very well once again with an electronic mixer for 3 minutes.
4. Mix very well once again with a mechanical mixer for 10 minutes.
5. Application:
a. As Admixture
b. Dilute 1-part bond SBR with 2 parts water. Mix thoroughly to obtain uniform consistency liquid. Add the diluted Bond SBR to pre-blended sand/ cement plaster, mortar, or other dry mixes. Mix for 3-4 min using mechanical mixer at low speed. Let the mixture stand for 10 min and mix again briefly to achieve homogeneous lump free mixture.
c. As Bonding Agent
d. Dilute 2 parts Poly Bond SBR with 1-part water. Mix thoroughly to obtain uniform consistency liquid. Apply using brush or spray directly onto substrate. If using hand pump, spray at a rate of 15 m2/litre. While bonding agent is still wet, follow immediately by applying plaster, render, mortars or joint tapes etc.

Colour: Milky White Liquid
PH: 9
Solids Content: 40-43%
Viscosity (Brookfield LVF, 60rpm)
Chloride content: Nil
Solubility: Soluble in water

This original sealed container has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25°C

N/A