A two-component, flexible waterproofing slurry consisting of a cement-based powder mortar (component A) and an emulsion resin (component B). Polywed Flex dries to a tough flexible layer of modified cement with excellent waterproofing properties.

1. Waterproofing of potable water reservoirs, both interior, and exterior.
2. Waterproof coating for roofs, concrete water tanks, lift well, inspection pits, swimming pools spillways, bathrooms, kitchens, and other wet areas.
Waterproof lining for water retaining structures, in addition, to be used as a backing to tiles, mosaic, and marble to prevent water absorption.

Two Components: Component (A) is a cement based modified Mortar with additives and a component (B) is liquid Latex.

1. The surface should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, etc. Damp the surface with clean water. Metal surfaces should be wire brushed to remove moss, mildew loose paints and rust.
2. Mix the two components A & B with slow speed drill so as to obtain a creamy coating. Component “A” is the cement based mortar and component “B” is the liquid Styrene acrylic. Make sure you mix the very well with a mechanical mixer for 3 minutes. Add water to obtain the mixture.
3. Apply the 1st coat of polyflex using a roll and leave the coat to dry for 4 hours. Always damp surface before coating.
4. Apply second coat of Polyflex.
Leave both coats to dry for 24 hours. Allow to cure for two days.

Adhesion to concrete N/mm2: 3.2 Adhesion
Resistance to tearing:160 kg/cm2
Powder Density: 1.47 g/l
Liquid Density: 1.04 g/l
Mixed Density: 1.80 g/l
Grain Size: 0-0.5mm
Adhesion to concreate N/mm2: 2.00
Thick coat: 1-1.5 kg/m2
No. of coats recommended: 2 coats
Tensile strength: 170kg/cm2
Resistance to tearing: 160 kg/cm2
Flexibility of 1.5 film thick: >50&

This original sealed container has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25°C.

American National Standards Institute: ASTMC-C-307American National Standards Institute: ASTN D-522American National Standards Institute: ASTMD-412American National Standards Institute: AC1503R