Poly Plug is a fast setting and easy to use cementitious mortar for rapid patching and plugging of water leaks in the concrete structure. This product only requires the addition of water and has excellent bonding and adhesion to concrete.

1. Used for patching water leaks in concrete structures.
2. Used for patching tunnel lining, sewage plants, basement, and water tanks.
3. Used for patching concrete foundations and various concrete segments.

1 Powder Based Component

1. All substrate should be clean and free lose material and contamination. All areas to be patched should be cut back to a minimum depth of 15mm. Leaking cracks should be chased out to a depth of 20mm. 15mm.
2. Add one-part clean water to three parts of Poly Plug Powder
3. Using an electric mixer and at a very slow speed keep mixing until the mixture becomes like a dough or a stiff mixture.
4. Apply poly plug on the area of leakage generously and hold down for 30 seconds. Keep applying the poly plug and even out the surface using a knife. using a trowel
5. Wait for the Poly Plug to set and fully dry for the next 24 hours make sure you don’t touch or damage the surface

Setting time: Approx. 60 seconds @ 25˚C
Compressive strength: 16N/MM2 @ 24 hours

This original sealed container has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25°C.

British Standards Institute: BS 6319 pt2:1983