A concentrated acidic cleanser to remove grouts, or cement mortar residues, mineral deposits, rust stains, and bumps from the surface of tiles, and rock surfaces. It is also effective for removing hard water stains, lime deposits and soap foams.

1- Areas with cement deposits and dirt, especially on ceramics and porcelain.
2- It is effective in removing hard water stains, limestone deposits and soap deposits.
3- It is applied in many places such as kitchen surfaces, bathrooms and other areas where there is heavy movement.

Two Liquid Components A (hardener) and B (Resin)

1. Shake the product very well before using for one 30 seconds.

2. Working in a small, manageable area of ​​about 15 sq. ft. (1,39 m2), liberally apply an even coat over the required area with a paint brush, mop, sponge or paint pad. Do not apply with a sprayer.

3. Immediately remove product from unintended surfaces with a wet cloth to prevent potential damage to those surfaces.

4. Allow product to stand on the surface for 2 to 5 minutes. Do not let Polywed Tile & Grout Cleaner dry on the surface. Keep the surface wet by adding more product.

5. Thoroughly rinse the surface with clean water. Mop or wet-vacuum up the dirty solution and allow the surface to dry thoroughly.

Appearance: Clear Liquid
Odor: Slight Odor
Physical State: Liquid
PH: 1 (highly Acidic)

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

N/A