Used for traditional plastering works in a clean and speedy manner, while keeping a homogeneous mix. Due to its high content in additives and fibers, it allows better shrinkage control as well as improved workability and curing.

1. Used after the structural completion, such as electric wiring, plumbing, and air conditioning connections.
2. For external and internal use on walls, roofs and surfaces for decoration purposes.
3. Plaster is used on walls or directly on blocks, usually on rear facades.

1 Powder Based Component

1. The surface should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, etc. and ensure the surface to be treated is generously wet
2. Add 4-5 liter of clean water to 25kg of Poly Plasture.
3. Mix with an electronic mixer well for three minutes until a homogenize market.
4. Leave the mix to set for five minutes.
5. Apply bay manually plastering trowel or mechanical projection machines.

Appearance: Gray powder
Density: 1.47+-0.01
Grain size: 0.02 to 2.0mm
Wet mix: < 2 hours Initial adhesion: > 0.3 N/mm2
Bending strength: 3+-1 N/mm2
Density of hardened products 1.8+-2 N/mm2
Coverage: 1.5kg/m2/1mm thickness

This original sealed container has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25°C

American National Standards Institute: ASTM-C144 C 897-96