An Emulsion (oil based) full Gloss paint for interior and exterior use, consisting of an acrylic copolymer and concentrated chemicals to gain durability and resistance to weather. Used for walls, ceilings, panels, gypsum and concrete surfaces.

1- Used as an undercoat is a preparatory coating put on materials before painting.
2- ensures better adhesion of paint to the surface, increases paint durability.
3- provides additional protection for the material being painted.

1 Liquid Component

1- Remove the old paint (if any) completely out of the surface, and to make sure that the surface completely clean and free of dirt, dust, oils and grease.

2- Mix the primer well with a mechanical mixer for 3 minutes until the mixture is homogeneous
3- Apply the Poly Paint Primer with a roll
4- Leave it to dry for four hours
5- After the first coat has dried within 4 hours of application, a second coat of Poly Paint Primer in the opposite direction is recommended.

Density: 1.4 at a temperature ° 25 m.
ASTM D-14 Viscosity: 95 Unit Corps at a temperature ° 25 m.
Solid content: 34% by volume.
ASTM D-5201

This original sealed container has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25°C.

American Society for Testing and Materials: ASTM D-5201