A German Formulated Grouting System available in 12 colors

1- Grouting of walls and floors joints subjected to a varying range of dry or humid conditions
2- Compatible with Polyweds tile adhesive range
3- Suitable for use with most type of tiles such as Ceramic, Porcelain, Terrazzo, Marble Tile Joints

1 Powder based component

1- Add 3 ltr of clean water for every 10kg of this product
2- with an electric mixer, mix the water and the grout well for 3 minutes until a lump free paste is obtained
3- Let the paste rest for 5 minutes to allow all the chemical compounds to dissolve in the water
4- clean the joints well before applying the grouting mixture. After joints are clean use a grout float with a rubber ending to fill the joints
5- Remove the excess grout on the tile carefully before it dries. Make sure while cleaning excess grout you don’t clean the joints

Comp.Strength: > 30N / mm2
Tensile Strength: > 2.5N / mm2
Shrinkage: < 2mm / m
Application temperature: from 5 to 35 ° C
Initial setting: 20 min

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

European Standards: EN 13888 American National Standards Institute: ASTM C 109 American National Standards Institute: ATSM C 230American National Standards Institute: ATSM C 348