Waterproofing powder admixture to increase the water repellence.
Polywed’s Asuka is a general-purpose waterproofing powder admixture used to increase the water repellence of render, mortar, and concrete. By increasing the water repellence and maintaining the vapor permeability of a mix, there is lower water absorption, lower risk of efflorescence, and staining and higher durability.
1. Rending base coats and reduces the suction to allow easier application of following render coats.
2. Waterproofing of precast concrete and waterproofing of cement plasters.
3. Concrete and mortars in regular contact with water.
1 Powder Based Component
1. Poly Asuka’s waterproof powder is recommended for use at a dosage of 1 x 1kg bag per 50kg of cement.
2. Add to cementitious mixture but ensure to carry out trial mixes to determine the optimum dosage rate. Use clean, sharp, well graded sand for mortar and render mixes in addition to clean, well graded aggregates for concrete.
3. Add water to the mixture
4. Mix well with an admixture heavy duty electronic mixer well for three minutes until a homogenize mixture is obtained.
5. Apply the cement.
Appearance: white powder
Air entrainment: Less than 2%
Chloride content: Nil
Flammability: Nil
Alkali Content: Less than 5.0g. Na20 equivalent/ liter of admixture.
This original sealed container has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25°C.
British Standards Institute: BS 5705