Epoxy Supercoat 550 is a solvent free, non-toxic, high build epoxy resin protective coating with outstanding chemical and mechanical properties. Supercoat 550 is supplied as a two component product in pre-weighed base and hardener packs, ready for site mixing.

1- Heavy duty protective coating for concrete and steel.
2- Internal protective lining for potable water concrete or steel tanks.
3- Heavy duty wall and floor coating in food processing plants, grain silos, dairies, hospitals, pharmaceutical industries, car parking, power stations, oil refineries, and sewage treatment plants.

Two Liquid Components (A) Hardner and B (Resin)

1- The surface should be sound, clean, free from loose material, grease, laitance, dirt curing compound, etc.
2- Add the Epoxy Primer to the surface and leave it for one day to dry well
3- After the epoxy primer has dried up, fill in any cracks with epoxy repair using a putty knife and leave it to dry for 5 hours
4- Mix Polyweds Epoxy components “A the resin ” and “B the hardener” very well and leave them for a maximum period of three minutes.
5- Apply the mixture of components “A” and “B” using an epoxy roll and let it set for 6 hours.
6- Apply the second coat of epoxy in the opposite direction and leave it for 12 hours.

Compressive strength: 70N/mm2 @ 25 C̊
Flexural strength: 40N/mm2 @ 25 C̊
Tensile strength: 20N/mm2 @ 25 C̊
Bond strength: 2.0N/mm2 (concrete failure)
Solid content: 100%

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

British Standards Institute: BS 6920:2000