A three-component epoxy-based bonding and repair system
A three component epoxy based solvent free and fast strength development repair mortar. Once components of the kit are mixed this product becomes suitable for vertical and overhead bonding and structural repairs.
1- Used for threaded rods and reinforcing bars in uncracked concrete to suit various anchoring applications.
2- Patching repair to defective concrete and bonding concrete to concrete or metal to concrete
3- For gap filling and pin holes in concrete
Three Components: (A) Hardener, (B) Resin, and C (Powder)
1- The surface should be sound, clean, free from loose material, grease, laitance, dirt curing compound, etc.
2- Mix Poly Epoxy primer components (B) the hardener into component (A) the Resin make sure you mix B into A and not the reverse. Mix both components very well with a mechanical mixer until a homogeneous mix is obtained. Leave the mixture to set for a maximum duration of three minutes
3- Slowly add “Component C” mix for additional 2 minutes or until all aggregate pieces are completely covered by the epoxy
4- Apply the Epoxy Mortar on your desired clean surface using an epoxy roll or brush
5- Leave it for one day to fully dry and set.
Density (ASTM D1475) kg / ltr @ 25o 1.05 ± 0.05
Min overcoating hrs @ 25 C: 12 ± 30 min
Touch dry (ASTM) hrs @ o 8 ± 15 min
25 C: Solid content: 100%
Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.
British Standards: 6319