UB Putty

Powder putty specifically used for repairing, leveling, and smoothing surfaces before paint

SCOPE OF USE

Wall smoothing – Ceiling finishing – Joint treatment – Crack repair – Surface leveling – Paint preparation

Instruction of use

1. The surface should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, etc.

2. Mix with a mechanical plaster mixer or low-speed electric drill fitted with a suitable paddle for 3-4 minutes, until a uniform, lump-free consistency is achieved.

3. Spread the putty directly using a putty knife or roll and make sure the surface is even.

4. Leave to dry for 2 hours to fully set.

5. Apply the second coat in the opposite direction (if needed) to ensure the surface is even and flat.

Technical Information

1. Tensile Adhesion strength 1.5 N/mm2 after 28 days

2. Elongation at break 150% 3. Mortar Density 1.35 kg/liter

Storage

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

Compliance

1. EN2811-1

AVAILABLE SIZES

20 KG

DOWNLOADS

Product Data Sheet

File size: 1.16 MB

Document: UB-POWDER-BASED-PUTTY-.pdf

Download

Sales Catalog

File size: 0 MB

Document:

Download

UB Putty

SAR 29.40
Online prices may differ from bulk and direct sale prices

Coverage

16 squre meter @ 2 coat for 20 liter pail thickness 0.3mm

UB Putty

SAR 29.40

Category: UB Tags: tag1, tag2, tag3

Cart (0)

UB Putty

Related products

French Tile Adhesive

Epoxy Steel Primer

Concrete Repair 300

Epoxy Cleaner

UB Putty