HOME

Cart (0)

No products in the cart.

E7

Anchor Fix

Heavy-duty concrete anchoring for threaded rods & rebar

DESCRIPTION

A high-performance, three-component epoxy anchoring system designed for secure installation of threaded rods and rebar in uncracked concrete.
Offers excellent bond strength, durability, and chemical resistance for structural applications.

SCOPE OF USE

Precast Concrete – Anchoring steel beams – Heavy Machinery Installation – Repair and Maintenance

Components

Three components A : Resin B: Hardener C : Powder based Component packaged in one box (2 tin cans,2 bags of Sand ,2 Medium Sized Cans)

Instruction of use

1- The surface should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, etc.
2- Mix Poly Epoxy primer components “A the resin” and “B the hardner” very well with a mechanical mixer.
3- After thoroughly mixing, add component “C the sand” and mix for additional 2 minutes until the mixture is viscous
4- fill the drilled hole with the Poly epoxy anchor-fix mixture, then proceed to fixing the steel rod inside the gap, and hold the rod firmly for 3 minutes.
5- Leave it for five hours to fully dry and set.

Technical Information

1. Compressive Strength 75 N/mm2
2. Flexural strength 41 N/mm2
3. Bond strength 23 N/mm2 (ASTM D638)

Storage

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

Compliance

1. ASTM D695 2. ASTM D790 3.ASTM D638

AVAILABLE SIZES
1.5 KG
DOWNLOADS
Product Data Sheet
File size: 0.69 MB
Document: E7-datasheet.pdf
Download
Sales Catalog
File size: 18.54 MB
Document: cat_epoxy.pdf
Download
E7
Anchor Fix

Anchor Fix

SAR 63.00

An Adhesive anchor system that has been specially formulated as a high performance, three epoxy component adhesive anchor system for threaded rods and reinforcing bars in uncracked concrete to suit various applications.

Total:
Category: Tags: , ,