Cement based pre-mixed highly waterproof grout mixture used to fill joints up to 4mm used for grouting pools for swimming pool tile joints.

1- Grouting of walls and floors joints subjected to a varying range of dry or humid conditions
2- Specifically designed to be compatible with Polywed Number 1 product used for laying & fixing tiles
3- Suitable for use with both ceramic and marble tiles

1 Powder based component

1- Add 3ltr of clean water (for a 10kg bag)
2- with an electric mixer, mix the water and the grout well for 3 minutes until a lump free paste is obtained
3- Let the paste rest for 5 minutes to allow all the chemical compounds to dissolve in the water
4- clean the joints well before applying the grouting mixture. After joints are clean use a grout float with a rubber ending to fill the joints
5- Remove the excess grout on the tile carefully before it dries. Make sure while cleaning excess grout you don’t clean the joints

Compressive Strength: ≥ 30N / mm2
Application Thickness: 2 to 8mm
Application temperature: from 5 to 35 ° C
Initial setting: 25 min

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

European Standards: EN 13888:2009European Standards: EN 13888: CG2 WA