An enhanced, polymer-modified C1TE tile adhesive formulated for superior performance across a wide range of environmental conditions. Suitable for bonding all types of ceramic, marble, and natural stone tiles to various substrates, ensuring strong adhesion, flexibility, and long-term durability.

Ceramic – Walls & Floors – Stone – Residental & Commercial Buildings

Single-component, powder-based adhesive , packaged in paper bags.

1- Surface preparation: Ensure that surface is clean with zero residue such as dust, grease, and moisture etc.
2- Add 4.0 ltr of water to 20 Kg tile adhesive. Slowly add water while mixing continuously with low speed mixer / drill (400-600 rpm) for 3 min until a uniform consistency is obtained.
3- Let the mixture stand for 10 minutes to allow the resins to dissolve completely.
4- Apply the Adhesive on the substrate to a uniform thickness of 2 to 3 mm evenly using a notched spatula
5- Fix the tile over the adhesive and press firmly to ensure maximum bonding between tile and adhesive.

1- Grade C1TE
2- Tensile Bond Strength upto 1 N/mm2
3- Compressive strength 20 N/mm2 after 28 days
4- Heat aging <0.5 N/mm2
5- Water Immersion <0.5 N/mm2 (EN1542)
6- Water powder ratio 0.23

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

SASO GSO EN 12004