A single component polymer modified with fiber-reinforced repair mortar, fine fillers, bonding chemicals, and high-performance additives. Used after plastering building blocks or bricks, to create a thin underlayment to repair undulations and provides a smooth surface finish that is ideal for subsequent application of paint & decorative coatings.

1. Applied internally onto walls and ceiling surfaces and suitable for use in wet areas like bathrooms, toilets and kitchens. 
2. Leveling of minor surface undulation of plaster and concrete. In addition to concrete surfaces that are smooth and also precast concrete surfaces. 
3. As a thin patch mortar, pinhole filler and color matching coat.

1 Powder Based Component

1. The surface should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, etc.
2. Add 12.5 liter of clean water on 25kg of powder-based putty and 0.75 liter of clean water for every 1.5kg of powder-based putty
3. Mix with a mechanical plaster mixer or low-speed electric drill fitted with a suitable paddle for 3-4 minutes, until a uniform
4. Leave it to sit for 10 min and please note that Mixed material must be used within 3 hours. Do not add water once the mixed filler mortar starts to stiffen or harden.
5. Spread the putty using a putty knife and make sure the surface is even. Leave to dry for 3 hours to fully set.

Mixed Wet Density: 2.0g / cm3
Coverage: kg / m2: 2
Composition: Special Polymers
Flexural Strength: > 9 MPa over 28 days
Texture mm using suitable nozzles:
• Fine: 0.5
• Medium: 1.2
• Coarse: 2.36

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

N/A