High viscosity liquid detergent for cleaning epoxy residue. This product is ideal for non-absorbent materials such as porcelain, glazed ceramic, and glass mosaics. It’s also effective in removing significant and consolidated residue.

1- Areas where epoxy grout has been used
2- Effective for removing hard-water stains, lime deposits, and soap scum.
3- Glazed ceramic and glass mosaics. It’s also effective in removing significant and consolidated residue

Two Liquid Components (A) Hardener and (B) Resin

1. Shake the product very well before using for one 30 seconds.

2. Apply on the surface to be cleaned or on the traces of epoxy and leave standing for a few minutes. The product is particularly efficient on fresh epoxy grout Working in a small, manageable area of ​​about 15 sq. ft. (1,39 m2), liberally apply an even coat over the required area with a paint brush, mop, sponge or paint pad. Do not apply with a sprayer.

3. Immediately remove product from unintended surfaces with a wet cloth to prevent potential damage to those surfaces.

4. If cleaning is carried out a few hours after applying the grout, it may be necessary to leave it standing for longer (at least 15- 20 minutes) or repeat the cycle.
Do not let this product dry on the surface. Keep the surface wet by adding more product.

5. Thoroughly rinse the surface with clean water. Mop or wet-vacuum up the dirty solution and allow the surface to dry thoroughly.

Consistency: liquid
Color: transparent straw yellow
Density (g / cm3): 10
pH: 10

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

European Commission Standards: 648/2004.