Asuka Plus is an easy to use liquid waterproofing admixture that improves the waterproofing properties and workability of cement mixes and lasts as long as the life of the structure.

1. For all structures that are in constant contact with water such as water reservoirs, basement, seawater, and underground water tanks.
2. Enhance waterproofing characteristics of plaster, screeds, toppings and other concrete substrates.
3. Concrete and mortars in regular contact with water.

1 Liquid Based Component

1. Add 3.5 kg of Poly Asuka’s Plus Liquid Waterproofing for every 100 kg cement Liquid Waterproofing Admixture to the mixing water for all work.
2. Add to Mixture(s):

a. CONCRETE: Normal concrete practice regarding mixing, placing
and curing must be followed at all times.

b. PLASTER: It is recommended that all work be done using a two
Coat method as follows:

b First Coat: A 10mm render of sand and cement with Poly Asuka Plus Liquid Waterproofing Admixture in the mixing water.
b Second Coat: Build up to the required finished thickness – but not less than 20mm total thickness. The second coat must be applied not less than 24 hours after the first coat.

c. EMEDIAL WORK: For all repair work, it is recommended that the existing
surface be hacked to form a mechanical key, followed by the use of a bonding agent

3. Add water based on the mixture used
4. Mix well with an electronic mixture for 3 minutes
Apply the mixture

Appearance: Brown Liquid
Specific Gravity: Typically, 1.25 – 1.16 @ 20o C̊
Chloride Content: NIL to BS 5075
Air Entrainment: Less that 2% additional air is entrained at normal dosages
Alkali Content: Less than 5.0g. Na2O equivalent / liter of admixture

This original sealed container has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25°C.

British Standards Institute: BS 5075