A ready oil-based putty used to provide a smooth finish for plaster, brick, stone, wood, etc. mostly used before painting or other finishes.

1. For curing oil-based paints
2. Skimming expanded polystyrene and asbestos for painting ease.
3. For filling small cracks in woodwork, defective paintwork, and pages between floor boards.

1 Liquid Based Component

1. The surface should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, etc.
2. Mix with a mechanical plaster mixer or low-speed electric drill fitted with a suitable paddle for 3-4 minutes, until a uniform, lump-free consistency is achieved.
3. Spread the putty directly using a putty knife or roll and make sure the surface is even.
4. Leave to dry for 2 hours to fully set.
5. Apply the second coat in the opposite direction (if needed) to ensure the surface is even and flat.

Composition: Special Polymers
Pot life: 3-4 Hours
Mixed wet density: 2.0g/cm3
Flexural Strength: >9MPaat28days
Aspect: Yellowish r white slurry

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

N/A