Polyweds oil-based curing compound is a clear solvent-based, the ready-to-use formula of Resin and quick evaporating solvents, which cures, hardens, seals, and dustproof freshly placed and/or existing concrete. When properly applied, this product provides a breathable film that allows moisture in cured concrete to evaporate, hence Providing a durable, tough, uniform, long-lasting film finish on exterior concrete surfaces.

1. Concrete areas that have been improperly cured or uncured concrete.
2. Provides resistance to areas that are exposed to chemicals, oil, grease, de-icing salts.
3. Surface areas that require hair-checking, cracking, dusting, spalling, and curing of other defects.

1 Liquid Based Component

1. This product should be applied 24 hours after the application of concrete and when the surface water has completely disappeared.
2. Use a sprayer or roller to apply a uniform film. Avoid puddling in low areas. If puddles occur, brush or roll them out. For optimum performance, apply first coat.
3. Wait for 2 hours for the first coat to fully set. Setting time may vary on weather conditions
4. After the first coat has thoroughly dried, apply a second coat. NOTE: The second coat should be applied at a right angle.
5. Leave it for three days to fully set.

N/A

This original sealed container has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25°C

n/a