A two component, epoxy solvent based that is designed to provide active anti-corrosion coating for steel reinforcement, steel structure, tanks, pipelines, plant components, etc.

1- Areas that require a protective coating from corrosion for steel, and galvanized steel substrates.
2- Areas that require resistance to salt and chloride attacks.
3- Areas and structures that require Excellent overcoating characteristics.

Two Liquid Components (A) Hardener and (B) Resin

1- The steel should be sound, clean, free from loose material, grease, laitance, dirt curing compound, rust etc.

2- Mix Poly Epoxy primer components “A the resin” and “B the hardener” very well with a mechanical mixer. Leave the mixture to set for 3 minutes.

3- Apply the epoxy steel primer on the steel using a roll or a brush.

4- leave it for 24 hours to fully dry.

5- Two coats are recommended on the steel specially in locations with a lot of sun exposure to ensure maximum protection against

Recoating time: 30-60 min @ 20 ° C – 15-40 min @ 30 °
DFT: 50 Micron / Coat
WFT: 165 Micron / coat
Specific gravity: 1.8 ± 0.01 @ 25C

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

American National Standards Institute: ASTM D520