A two-component; solvent-free, clear epoxy primer specially formulated and designed to be applied over a porous surface to seal it and to act as a bonding bridge between it and epoxy coating systems or mortar.  It obtains high durability for any system it becomes a part of, while in some cases it is considered mandatory in epoxy screeds by acting as a bonding agent. 

1- Used As a primer for porous and semi-porous concrete and steel substrates for both epoxy and PU flooring systems
2- Areas that require  high mechanical characteristics for all flooring system
3- Areas that require bonding to concrete and steel and high durability for flooring systems.

Two Liquid Components (A) Hardener and (B) Resin

1- The surface should be sound, clean, free from loose material, grease, laitance, dirt curing compound, etc.

2- Mix Poly Epoxy primer components “A the resin” and “B the hardner” very well with a mechanical mixer for 3 min

3- Leave the primer mixture to set for a maximum duration of three minutes.

4- Apply the Primer on your desired clean surface using an epoxy roll or brush.

5- Leave it for one day to fully dry and set.

Density (ASTM D1475) kg / ltr @ 25o 1.05 ± 0.05
Min overcoating hrs @ 25 C: 12 ± 30 min
Touch dry (ASTM) hrs @ o 8 ± 15 min
25 C: Solid content: 100%

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

European Standards: EN 13138 American National Standards Institute: ASTM D 1475 American National Standards Institute: ASTM D 2471