Poly Exterior Texture Paint AR

An Emulsion (oil based) full Gloss paint for interior and exterior use, consisting of an acrylic copolymer and concentrated chemicals to gain durability and resistance to weather. Used for walls, ceilings, panels, gypsum and concrete surfaces.

1- Used for interior and exterior decoration and coatings.
2- Used for residential and commercial buildings.
3- Used for wall surfaces, ceilings.

1 Liquid Component

1- Remove the old paint (if any) completely of the surface, and to make sure that the surface completely clean and free of dirt, dust, oils and grease.
2- mix the paint well with a mechanical mixer for 3 minutes until the mixture is homogeneous
3- Mix the paint with an electronic mixer for 3 minutes

4- Apply the Poly Paint with a paint roll and leave it to dry for twelve hours

5- After the first coat has dried up, a second coat of Poly Paint in the opposite direction is recommended.

Density: 1.5 at a temperature ° 25 m. ASTM D-14
Viscosity: 105 Unit Corps at a temperature ° 25 m.
Solid content: 40% by volume. ASTM D-5201

This original sealed container has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25°C.

American Society for Testing and Materials ASTM D-5201