1. Add 3.5 kg of Poly Asuka’s Plus Liquid Waterproofing for every 100 kg cement Liquid Waterproofing Admixture to the mixing water for all work.
2. Add to Mixture(s):
a. CONCRETE: Normal concrete practice regarding mixing, placing
and curing must be followed at all times.
b. PLASTER: It is recommended that all work be done using a two
Coat method as follows:
b First Coat: A 10mm render of sand and cement with Poly Asuka Plus Liquid Waterproofing Admixture in the mixing water.
b Second Coat: Build up to the required finished thickness – but not less than 20mm total thickness. The second coat must be applied not less than 24 hours after the first coat.
c. EMEDIAL WORK: For all repair work, it is recommended that the existing
surface be hacked to form a mechanical key, followed by the use of a bonding agent
3. Add water based on the mixture used
4. Mix well with an electronic mixture for 3 minutes
Apply the mixture