A cement based waterproof ready mixed plaster on which decorative and colored aggregates and marble chips are sprayed. It provides an excellent workability for any kind of wall and a wider range of patterns and colors than a normal plastering stone. excellent dirt pick-up resistance and is extremely stable against ultra violet light even in severe climates.

1. Finishing of the walls of any kind of building such as office buildings, public buildings, houses, hotels, etc.
2. Exterior wall for direct application on clay brick, concrete block, AAC block, precast/in-situ concrete and stone.
3. Areas that withstand high and low temperatures in addition to areas that require coatings that are waterproof, fireproof, and termite proof.

1 Powder Based component

1. Ensure all dust, dirt and foreign matter are brushed and scraped away, ensure the surface is solid, free from salts, oil, grease and ridges.
2. Mix a 20kg bag with 8 liter of water use an electric slow speed mixer for 2 or 3 minutes until a homogenous creamy paste is obtained.
3. Mix with a mechanical plaster mixer or low-speed electric drill fitted with a suitable paddle for 3-4 minutes, until a uniform, lump-free consistency is achieved. Allow the mortar to stand for 5 minutes, remix and use
4. Spread the mortar over the substrate in a 4-6 mm layer.3 and Trowel to achieve a smooth level surface.
5. After a period of approx. 10 minutes spray the marble chips over the mortar

Density powder: 1.36
Grain size: 0 to 1mm

Original sealed container has a shelf life of 12 months provided it is stored clear of ground and moisture and in a dry shaded place around 25°C.

N/A