is a semifluid acrylic with polymer resins. Once  applied in a thick coat, it provides  a flexible waterproof membrane for pitched roofs and facades allowing the product to follow  the expansion and tension cycles of the substrates.

ROOFCOAT shows an exceptional resistance to extreme weather conditions and UV rays . It does not pollute freshwater. It is non toxic and protects the environment.


ROOFCOAT is used on pitched roofs and vertical walls wherever waterproofing and flexibility is required on substrates such as:

  • Concreteroofs.
  • Zinc, asbestos cement and plastic roofing.
  • Corrugated and galvanized iron.
  • Bituminous coatings.


Appearance                Semi Fluid white

Density                       1.37

Viscosity                     1.60 poise

Ph                               8-9

Dry extracts                70% Elongation at break   250% Min.AppTemp5˚C

  • Surface Preparation:

The surface must be  clean, sound and free from dust, dirt, mosses and mould release agents.

  • Product Application:

ROOFCOAT is ready to be applied.

Mix the product with a spatula or a slow speed drill to recover  its homogeneity. Apply with a brush ,roller or an appropriate gun.

-For plastic ,galvanized or zinc roofs: apply one coat@1–2kg/m2.

–  For  concrete  roofs, asbestos roofings or bituminous roofs:

Apply one coat of ROOFCOAT diluted with

5%of water as a primer.Then after 8 hours at

20 C apply a second coat of undiluted ROOFCOAT @1to1.5kg/m2.

  • Thinner&cleaningagent: water.
  • Film1mm thick after 7 days drying.-Physical Properties:1-Elasticity:                       >250%

    2-Shore Hardness:           >50

    3-Resistance to ageing:   Excellent

    4-Fire resistance:             Self-extinguishing

    -Chemical Properties:

    1.Phosphoric Acid:            Excellent

    2.Hydrochloric Acid:         Excellent

    -To Alkalis:

    1-Ammonia:                      No Attack

    2-Alchols:                          No Attack

    3-Gasoil:                           Good

    4-Aliphatiic hydrocarbons: The layer gets weak

    5-Aromatic hydrocarbons: Bad

Provides onsite technical assistance  and guidance  for use of our products.  For further information consult POLYWED technical services.


All materials should be stored under cover and clear of the ground. Protect from all sources of moisture and frost. Rotates tock in order not to exceed the shelf life of 12 months. Wind and direct sunlight must be avoided.


In 20 Kg Pails.


As with all chemicall products, caution should always be exercised. Protective clothing, such as gloves and goggles,  should be worn(see packaging for specific instruction). Treat  any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed, do  not induce vomiting, but call for medical assistance immediately. Ensure the container is available for the medical attendant to examine any relevant   instructions and contents  details. Reseal all containers after use and ensure products is stored as instructed on the safety section of the labeling.