POLY OXIDE

OXIDE  PRIMER is a high quality, alkyd based primer with excellent coverage. It contains zinc  phosphate to give better anti-corrosion properties.lt is suitable for iron and steel and pretreated galvanized steel. Available in Grey  and Red colors.

ADVANTAGES

  • Fast curing
  • Standard guns can be used
  • Can be used at low temperatures
  • High load capacity
  • Non-sag, even overhead
  • Low wastage
COVERAGE  

Approx 13

m2/Kg@30mic dft

APPLICATION Brush/Roller/Spray
THINNER White Spirit
DRYING Min 1hour touch dry
RECOATING After6-10 Hours
CLEANING OF TOOLS White Spirit
FLASHPOINT 40˚C
DENSITY 1.12+0.02g/cm3

Ensure surfaces are sound, dry and free from grease, wax and oil.

In case of iron and steel, remove all loose scale and rust by thorough scraping and wire burshing. Where necessary, surfaces, should be blast cleaned.

PRODUCT INFORMATION

After suitable surfaces preparation,apply

1 or 2 coats of OXIDE PRIMER

if   the  surface  has  been  blast cleaned Finish with an appropriation over coat.

PRECAUTION

Flammable.

Ensure good ventilation during application and drying.

If swallowed seek medical advice.

Wear suitable mask and eye protective goggles.

Avoid contact with direct sunlight.