TILE GROUT FOR CERAMIC TILES
POLYGROUT is a ﬁne colored powder which, when mixed with water, gives a smooth, easily applied creamy paste for clean grouting of ceramic tiles. It sets to a decorative water resistant ﬁnish.
Water-resistant (suitable for swimming pools).
Resistant to cracking in joints up to 3mm wide.
Ideal for internal and exterior applica- tions.
POLYGROUT is a blend of hydrophobic cement, ﬁllers and organic additives.
BS 5980 – Cementitious Adhesives and Grouts.
Allow at least 24 hours between ﬁxing tiles and grouting. Mix grout powder with water to give a smooth, thick consistency. Leave to stand for 15 minutes before using. Apply to tile joints with a squee- gee, brush or sponge.
Remove surplus grout with a damp sponge. When grouting is completed, polish tiles with a dry cloth
|Comp.Strength||> 30N / mm2|
|Tensile Strength||> 2.5N / mm2|
|Shrinkage||< 2mm / m|
POLYGROUT is available in 10 and 20kg sacks.
Store out of direct sunlight, clear of the ground on pallets protected from rain- fall. Avoid excessive compaction.
– Health and Safety:
As POLYGROUT contains Portland cement, POLYGROUT may cause irrita- tion to skin or eyes. In case of acciden- tal contact with eyes, immediately ﬂush with plenty of water for at least 10 min- utes and seek medical advice if neces- sary.
FOR MORE INFORMATION, PLEASE CON- TACT PHONENO.00966 2 6204224